NP261 Chevrolet and GMC Transfer Case Buy Factory Direct & Save, we Ship World Wide!

Take advantage of our NP261 Transfer Case expertise!

Having issues diagnosing problems with your NP261 transfer case? We can help free knowledgeable technical support! To speak to a Drivetrain Expert or to place an order call us toll free 888-824-2012. We have a large inventory of rebuilt NP261 transfer cases plus Transfer Case parts. Our factory rebuilt re-manufactured transfer cases are tested before leaving our factory to ensure quality, saving you both time and money!

Below you will find a detailed list that includes rebuilt re-manufactured NP261 Transfer Cases, a complete parts list including: bearing rebuild kits, gaskets, seals, small parts & thrust washers, bushings individual bearing, forks, hubs and sliders, oil pump, planets, chain, sprockets, shafts input & main, cases housings and miscellaneous parts. If you need more information or cannot find the parts you need give us a call, if you would like to save money, ask about our good take out parts (GTO), they are inspected and guaranteed. np261

Our rebuilt transfer Cases include all new bearings, gaskets, seals, chains clutch and viscous couplers where used. These units are tested before leaving the factory.

About the NP261 Transfer Case

The NP261 transfer case was manufactured by New Venture Gear. This model is chain driven. The NP261 is 4WD with manual shift. The NP261 was used in Chevrolet and GMC in Silverado's and GMC Sierra. This unit was utilized beginning in 1999.

automatic transmission rebuilt

The NP261 was manufactured with left side drop output and has a low gear ratio of 2.72 to 1. This unit has combination of 2 high, 4 high, neutral and 4 low. The units are provided with 27, 29, and 32 spline front output and utilizes a rear slip yokes. Some pickups are supplied with heavy duty (HD) and extreme heavy duty (XHD) heavy duty version with wider chains, sprockets and HD planetary.

Potential problems with the NP261 Transfer Case

This unit can have issues with premature case failure caused by the oil pump housing wearing a hole in the case, causing loss of fluid and transfer case failure. Midwest provides a machine case protector plate to solve this problem. A better option is to replace the rear case with the new design shown on the left, don't leave home without it. Another problem associated with the NP261 transfer case is input and or output bearing wobble wearing out the case. The case material is magnesium,which can build up heat in the unit causing failure of range fork and range hub, we recommend that these items be replaced during the rebuild cycle. The NP261 is also susceptible to problems caused by running the NP261 transfer case on hard surfaces like concrete or asphalt. Run 4WD only on loose dirt, snow, mud, sand or grass as the different wheel speeds in turns can put excessive torque loads on chain and sprockets.

If you have purchased your vehicle used the very first order of business is to double check the tire diameters. Used car dealers may have mismatched the tires to make the sale. Mismatched tires will cause the NP261 transfer case to fail. Recommended fluid for the NP261 transfer case is automatic transmission fluid (ATF).

TDiscount on G6  partshe correct quality parts the first time for your NP261 Transfer Case!

In addition to a rebuilt 12 month warrantied NP261 transfer cases we offer all parts required to rebuild your unit, we have new parts and per your request we can provide good used takeout parts to save you money! Part identification is occasionally a problem and knowing just what parts need to be replaced can be an issue, we can help by identification of associated parts that should be replaced when one part fails. Take advantage of our expertise! Buy parts from Midwest Transmission Center and receive bonus free telephone expertise to assist you in diagnosing the problem, part(s) required and additional phone assistance when you are in the re-assembly processes if required. We have a large inventory of rebuilt NP261 transfer cases plus Transfer Case parts. Our factory rebuilt re-manufactured Transfer Cases are tested before leaving the factory. Save yourself time and money!

Free NP261 Transfer Case parts illustration

We provide a detailed list of rebuilt NP261 units and parts that are available plus detailed assembly illustrations to help you in parts identification and the purchasing phase of the rebuild process. Rebuilt NP261 transfer cases include all new bearings, gaskets, seal, clutch parts, chains and filters. Below we provide a NP261 parts illustrations to assist you with the correct identification of the parts you need. Select the parts you require from the the list below and give us a call 888-824-2012 .

Select this link to see what models that use this Transfer Case.

If you would like to save money ask about our good take out parts (GTO), they are inspected and guaranteed. Use our online shopping cart, just click the part number and see additional information, add to cart or proceed to check out. If you need more information or cannot find the parts you need give us a call 888-824-2012

Midwest Transmission an automotive parts rebulider and remanufacturer can help you with your NP261 Transfer Case

Midwest transmission has been in the automotive re-manufacturing and rebuilding business for 19 years, and shipping completed units world wide. To improve quality Midwest was one of the first companies to include dyno testing

np261

of manual transmission prior to shipping as a final step in the quality control process. We specialize in manual transmissions, automatic transmission and transfer cases. We can help with improving performance and conversions. 22 employees shipped over 9000 units last year. Guaranteed quality and correct parts supplied. You can see the complete line of products that we offer at www.midwesttrans.com.

This information tag is located on rear of transfer case near where the driveshaft exits. Please supply the assembly number when ordering a replacement.

right parts first time

Need Stronger Parts?

Midwest Transmission can Cryogenic Treat any shaft or gear. This cryo treatment will add 30% in component strength. Call 888-824-2012 for a quote.

Applications  
Model Years
 
Chevrolet & GM Sierra 2500 & HD 29 Spline input 31 Spline rear 2000-2006
Chevrolet 3500 & HD 32 Spline input 32 Spline rear XHD 2001-2006
Suburban 1500 27 Spline input, rear slip 1999-2004
Suburban 1500 32 Spline input rear slip 1999-2004
Suburban 2500 32 Spline input rear slip LD 1999-2004
Suburban & GM Sierra 2500 32 Spline input rear slip HD 1999-2005
GM Sierra 3500 & HD 29 Spline input 31 Spline rear XHD 2001-2006
Tahoe & Sierra 1500 27 Spline input, 32 rear slip LD 1999-2006
Tahoe & Sierra 1500 32 Spline input rear slip LD 1999-2006
LD Light Duty, HD Heavy Duty, XHD Extreme Duty

Use our online shopping cart, just click the part number and see additional information, add to cart or proceed to check out.

Rebuilt Tested NP261 Transfer Cases 12 Month Warranty

REBUILT TRANSFER CASES
GM Pickup, Silverado, Yukon 27 Spline Input 1999-Up TCGM035
$1,326.67
GM Pickup, Silverado, Yukon 32 Spline Input 1999-Up TCGM036
$1,326.67
GM Pickup, Silverado, Yukon 29Spline Input 1999-Up TCGM041
$1,326.67
Core deposit on above transfer cases
$250.00
GM Pickup NP261XHD 29 Spline input 31 Spline Output Allison M74 Option 2001-Up TCGM050
$1,600.00
Core deposit on above transfer case
$500.00

Rebuilt Overhaul Bearing Kits NP261 Transfer Case

BEARING KITS
NP 261 (32 Spline Output) TRSBK371
$159.90
NP 261XHD (31 Spline Output) NP261XHD/NP263XHD, 01-up (ZF 6 Spd / Allison Automatic)
$184.94

Small Parts Kit NP261 Transfer Case

SMALL PARTS KITS
NP 261, NP 261XHD MWTSP261-50
$32.75

Gaskets Seals, & Filter NP261 Transfer Case

GASKET & SEAL KITS
NP263HD Gasket & Seal Kit MWTTSK246
$33.19
N.I. NP 261 (32 Spline Output) TSK261
$33.00
N.I. NP 261XHD (31 Spline Output) TRSTSK261XHD
$55.75
SEALS
070A Input Seal 200245
$3.73
081A Front Output Seal 1998-UP (NP 261) (NP 263) Updated MWTGM12547656
$17.26
074A Rear Output Seal (2.695 inch x 1.825 inch) OE MWTNV22507
$28.67
074A Rear Output Seal (3.035 inch x 2.125 inch) OE MWTNV21938
$5.33
FILTERS
012E Pump Screen (38 Spline Oil Pump) (NP 261) NP4338943
$4.20
012E Hose & Pump Screen (49 Spline Oil Pump) (NP 261, NP 261XHD) TRS435012
$22.92
GASKETS & O-RINGS
N.I. Adapter to Transfer Case Gasket 100127
$1.75
311E O-Ring, Pump Pick-Up Tube (38 Spline Pump) (NP 261) TRS401330
$1.00
311E O-Ring, Pump Pick-Up Tube (49 Spline Pump) (NP 261, NP 261XHD) TRS401330A
$1.00

Bushings & TH Washers NP261 Transfer Case

BUSHINGS
066A Bushing Extension Housing (2.340" OD) OE XHD MWTNV18172
$35.36
066A Extension Housing (2.010 inch OD) (32 Spline Output) (NP 261) MWT100408
$10.00
WASHERS
215C Planet Thrust Washer (Plastic) (All) TRS411215
$4.00

Bearings NP261 Transfer Case

BEARINGS & RACES TRS
268E Front Output Shaft Bearing (Rear) (.630 inch Wide) 6010
$16.67
268E Front Output Shaft Bearing (Rear) (.940 inch Wide) HK 5020-U
$10.00
267C Input Needle Type Pocket Bearing (Inner) DB73167
$19.40
240C Input Bearing (.630 inch Wide) 6010
$16.67
210D Output Bearing (Rear) 6208N
$11.00

Shift Forks NP261 Transfer Case

FORKS
850B Mode Fork (Aluminum) (Cast # 28624) (All) w/pads MWTNV27756
$68.51
849B Range Fork (Aluminum) (Cast # 17833) (All) MWTNP17833
$37.69
840KB Fork insert kit TRS401840K
$16.96

Hubs & Sliders NP261 Transfer Case

HUBS & SLIDERS
Mode Sync Assy Slider & Hub NP261 NP263 MWTNV41061-U
$73.33
646C Mode Slider 48 Teeth MWTNV17823-U
$73.33
645C Range Slider & Hub (NP 261)

NP4796906  

$60.00
645C Range Slider & Hub (NP 261XHD) (NARROW HUB) TRS401645CK
$74.08
701-1 Inner Syncro Ring NP261 NP263 MWTNV27722
$37.13
701-5 Outer Syncro Ring NP261 NP263 MWTNV26081
$53.26
701-3 Fiber Friction Syncro Ring NP261 NP263 MWTNV21635
$53.26
606D Drive Hub / Bushing (Splines into Drive Sprocket) (2 Piece Synchro) TRS401606
$60.00
606D Drive Hub / Bushing (Splines into Drive Sprocket) (1 Piece Synchro) (updated) rides on M/S inside drive sprocket 4510
$146.86

Pump, Planet NP261 Transfer Case

PUMPS
500D Pump Assembly (38 Spline) (NP 261) MWTNV29191
$56.65
500D Pump Assembly (49 Spline) (NP 261, NP 261XHD) MWTNV25904
$65.00
463E Tube, Oil Pump (38 Spline Pump) (NP 261) TRS482463
$3.33
463E Tube, Oil Pump (49 Spline Pump) (NP 261XHD) TRS482463A
$3.33
Oil Pump Clips Updated NP261 NP263 HD & XHD MWTGM89059653
$9.95
PLANETS
588C Planet (6 Pinion) (used w/ .630 inch Wide Input Bearing) (All) TRS351588A
$179.98

Shafts Input & Main NP261 Transfer Case

SHAFTS
670C Input Shaft (27 Spline) (NP 261) TRS401670
$246.62
670C Input Shaft (32 Spline) (NP 261) MWTNV42740
$206.67
670C Input Shaft (29 Spline) (NP 261XHD) MWTNV43996
$166.67
672D Main Shaft (38 Spline Pump) (NP 261) TRS401672
$182.30
Main Shaft (NP 261) (NP 263) MWTNV47936
$132.00
Main Shaft (NP 261) (NP 263) Machined must use NV27721-M MWTNV47936-M
$132.00
672D Main Shaft (49 Spline Pump) (NP 261XHD) TRS401672A
$181.91
672D Main Shaft (49 Spline Pump) (NP 261) (NP 263) MWTNV48714
$221.33
Main Shaft Snap Ring required going from 38 to 49 Spline Pump TRSMWT44716
$4.00

Cases & Housings NP261 Transfer Case

CASES & HOUSINGS
760-1A Case Half (Front) (NP 261) MWTNV30959
$281.98
760-1A Case Half (Front) (Cast # 30601) (NP 261XHD) MWTNV21943
$300.00
Case Half (Rear) (NP 261XHD NP 263XHD) MG620002
$166.67
Case Half (Rear) Standard (NP 261 NP263) MWTMG62001
$220.00

Chains & Sprockets NP261 Transfer Case

CHAINS & SPROCKETS
700E Chain (1.25 inch Wide) 49 Links 98 Pins, 3/8 inch Pitch, Rocker Pins MWTCL10-072
$116.00
700E Chain (1.50 inch Wide) 42 Links . 84 Pins, 7/16 inch Pitch, Round Pins MWTCL10-074
$124.00
700E Chain (1.50 inch Wide) 49 Links 98 Pins, 3/8 inch Pitch, Rocker Pins MWTCL10-069
$116.00
805D Drive Sprocket (1.25 inch Chain) (NP 261) TRS401805
$45.33
805D Drive Sprocket (1.50 inch Chain) (NP 261) TRS401805B
$45.33
805D Drive Sprocket (1.50 inch Chain) (NP 261XHD) TRS401805A
$45.33
806E Driven Sprocket (1.25 inch Chain) (NP 261) TRS401805
$45.33
806E Driven Sprocket (1.50 inch Chain) (NP 261) TRS401805B
$45.33
806E Driven Sprocket (1.50 inch Chain) (NP 261XHD) TRS401805A
$45.33

Miscellaneous Components NP261 Transfer Case 

MISCELLANEOUS COMPONENTS
N.I. Case Protector Plate - Anti Wear (Prevents Pump Lug Wear in Case) Machine part not stamped sheet metal MW52007
$50.00
N.I. Selector Support, Shift Cam (All) TRS401626A
$30.05
626B Shift Cam (All) TRS401626
$29.26
862D Snap Ring, Drive Hub (All) TRS401860
$2.99
861D Snap Ring, Rear Output Shaft Bearing (NP 261) NP4856643
$22.00
861D Snap Ring, Rear Output Shaft Bearing (NP 261XHD) TRS352860B
$3.79
860D Snap Ring, Rear Main Shaft Bearing, Outer (All) TRS482860
$4.00
436A Speed Sensor (All) TRS411436
$29.10
997D Speedometer Tone Wheel (38 Spline) (NP 261) TRS401997
$37.78
997D Speedometer Tone Wheel (49 Spline) (NP 261, NP 261XHD) GM12478089
$13.27
775A Stud, Front Case (NP 261) 260705
$4.00
411A Switch, 4wd Indicator (3 Prong) (Electrical) (All) TRS351411A
$30.50
490A Vent Tube (All) 411490
$6.67

Click Images to enlarge and shrink

np261 parts

np261 transfer case parts

case saver

Minimum order $25.00, Shipping and handling charges will be added.